PET water bottle blowing machine

Automatic Bottle Blowing Machine 1) Full automatically bottle blowing 2)Capacity :5500pcs/H 3)Product Type: Plastic Bottle

Automatic Bottle Blowing Machine

  

JYX-A6 is the fastest liner bottle blowing machine in mainland of China by now. JYX-A6 reaches around 5500BPH for 350ML bottle. Its baking tunnel is separated from the blow station so that time for mold opening is shortened with a result of speedy blowing and high output, damage to machine is lessened so as to keep reliable performance and prolong service life, as well as machine runs more smoothly and steadily.JYX -A6 automatic stretch blow molding machine is equipped with patented preform loading system, which consists of two manipulators: rectilineal manipulator and overturning manipulator. The rectilineal manipulator moves preform with neck up to the preform holder, after heating, the overturning manipulator grips heated preform and overturn 180 put preform to blow station with neck down. After stretching and blowing, the bottle is taken off by overturning manipulator. The specially designed preform loading & bottle discharging system avoid possible damage to preform & bottle during transportation.JYX -A6 is controlled by PLC. The whole process from preform feeding to bottle discharging is completed automatically with advantages of labor saving and no pollution. HY-A6 consists of three main parts: preform loading system, Heater channel & blow station.

 

Operation:The standard operation of JYX -A6 stretch blow molding machine includes four steps as followStep 1. Put the preform into preform container and the conveyer will take the preform to orientation units automatically.Step 2. Load the preform at neck up to preform holder, and then preform is conveyed into baking tunnel.Step 3. After heating, preform is conveyed into the blow station, then close the mold, stretch and blow under low pressure and high pressure, exhaust, open the mold.Step 4. The finished bottle is taken off by automatic discharging system

 

Technical parameter 

TYPE	ITEM	UNIT	J JYX -A6 technical data
Container	Product material	/	PET/PE/PC
	Container volume	L	0.05-2.0
	Theoretic output	Psc/hr	5500
	Preform length	M	50-200
	Max height of bottle	M	320
Molding	Preform inner diameter	mm	15-60
	Bottle diameter	mm	35-110
	Max mold plate dimension (L × W)	mm	380 × 460
	Max mold thickness	mm	200
Air compressor	High pressure compressor	M3/Mpa	1.2/30 × 4set
	Locking force	KN	170
	Mold opening stroke (adjustable)	mm	200
	Low pressure compressor	M3/Mpa	3.0/10 × 1sets
	Air dryer	M3/Mpa	2.0/30 × 1sets
Main machine electricity	Power	KW	30
	Voltage / frequency	V/Hz	380/50hz
Machine size and weight	Main machine (L × W × H)	M	4.8 × 2.15 × 1.8
	Main machine weight	T	5
	Conveyor (L × W × H)	M	1.4 × 1.1 × 1.85
	Conveyor weight	T	0.4
	High pressure compressor(L × W × H)	Kg	1.90 × 0.75 × 1.50 × 4sets
	Low pressure compressor(L × W × H)	M	1.85 × 0.75 × 1.50
	High pressure air reservoir tank (D × H)	M	0.70 × 2.25/3.0
	Air dryer (L × W × H)	M	0.85 × 0.50 × 0.95
	Air filters	Kg	10 × 5pc
Cooling water: cooling water recycling system can be used with its power of 8~10 liter per minute and 2~3 kilos water pressure
Total power: 51.9 high pressure air volume (1m/min); low pressure air volume (1.2m/min)
Safety	Auto emergency alarm	Safety inter-locking device

Processing:

1)   Pre-heating conveyor                                   2)  Air storage

3) Circuit board                                                 4) Bottle blowing

Processing production showing:

PET water bottle blowing machine